6320HF
HAWLE-FIT connector
polymer housing; POM grip ring and clamping nut
- For PE pipes according to EN 12201-2 and DIN 8074, up to PN16
- The new generation of fitting pipes HAWLE-FIT has been designed to connect PE pipes with an outside diameter of d 25 to 63 and a working pressure of up to 16 bar
- The HAWLE-FIT is designed for drinking water applications within a temperatue range of up to 30 °C
- Installation and dismantling is simply performed with no special tools required
- The service life of the HAWLE-FIT is guaranteed by the use of high-quality polymer materials; the clamping nut as functional carrier is very stable through its unique construction
- The special clamp toothing (no continuous groove) reduces the impact force on the pipe. This significantly enhances the service life of the pipe
- The stainless steel reinforcing ring increases the strength of the fitting with internal thread outlets
- UV resistant
Hawle quality guarantee
Product variants (5)
| Bookmark | BIM data | Item number | Description | Nominal diameter | Outlet 1 | Outlet 2 | Pressure rating | Weight |
|---|---|---|---|---|---|---|---|---|
| 5005752 | HAWLE-FIT PN16 CONNECTOR |
D 25-25 | PE25 | PE25 | PN16 | 0.17 KG | ||
| 5005755 | HAWLE-FIT PN16 CONNECTOR |
D 32-32 | PE32 | PE32 | PN16 | 0.22 KG | ||
| 5005760 | HAWLE-FIT PN16 CONNECTOR |
D 40-40 | PE40 | PE40 | PN16 | 0.37 KG | ||
| 5005764 | HAWLE-FIT PN16 CONNECTOR |
D 50-50 | PE50 | PE50 | PN16 | 0.54 KG | ||
| 5005768 | HAWLE-FIT PN16 CONNECTOR |
D 63-63 | PE63 | PE63 | PN16 | 0.8 KG |
Downloads
Find out more about our services.
This product was not found in your country
You can find similar products in the category Fittings