ISO fitting, POM 6320

6320

made of POM

2D/3D data

The right solution for all situations: this has been our requirement of Hawle ISO fittings and service valves made of POM since 1968. The fact that they can be reused makes them the perfect, affordable and safe solution for any temporary or fixed water supply connection. ISO POM fittings are quick and easy to install, while ensuring the highest levels of safety, reliability, and durability. After all, when it comes to water supply connections, we settle for nothing less.

Features

ISO:

The function of the ISO pipe fitting is clear and simple: the O-ring made of highly elastic elastomer seals even when depressurized due to its pretension on the pipe.
As the water pressure and pipe tension increase, the sealing and grip rings are compressed further into the conical chamber, thus increasing the sealing and gripping effect
The gripping and sealing functions only act on the outer diameter of the pipe; therefore only one fitting is required for all pressure ratings up to PN 16
The joint is flexible; the fitting can be turned on the pipe and disassembled on demand without affecting the grip or seal. The installation of the fitting is quick and simple.
The POM fitting in the new copolymer version is UVstabilized and offers excellent long-term stability
The colored dust caps of the POM fitting indicate the different leading medium (gas, water) and offer protection against contamination
In POM fittings all internal threads are reinforced with a stainless steel ring

All ISO pipe fittings can also be supplied for PVC pipes with a spezialised grip ring at extra cost.

Standards

ISO:

For PE-pipes according to EN 12201 and DIN 8074 | to PN 16; up to 30 °C medium temperature, also for vacuum (with support liner)
restraint acc. to DIN 8076 T1/T3
with special clamp for PVC pipes acc. to EN 1452-2

Hawle quality guarantee

Certificates

ÖVGW_W1.153_ISO-pipe-fitting-POM_until_10-2023_EN.pdf 175 KB

Explainer videos

Hawle house connections | EN

BIM data	Item number	Description	Nominal diameter	Pressure rating	Weight
	5005583	ISO-FITTING PN16 CONNECTOR	D 20-20	PN16	0.07 KG
Show	5018037	ISO2-FITTING POM PN16, WATER CONNECTOR, PE/PE	D20-20	PN16	0.066 KG
	5018628	ISO2-FITTING POM PN16, WATER CONNECTOR, PVC/PE, IMB	PVC25-PE25	PN16	0.106 KG
Show	5019717	ISO2-FITTING POM PN16, WATER CONNECTOR, PE/PE	D25-25	PN16	0.1 KG
Show	5018067	ISO2-FITTING POM PN16, WATER CONNECTOR, PE/PE	D32-32	PN16	0.155 KG
Show	5018200	ISO2-FITTING POM PN16, WATER CONNECTOR, PE/PE	D40-40	PN16	0.324 KG
Show	5019890	ISO2-FITTING POM PN16, WATER CONNECTOR, PE/PE	D50-50	PN16	0.478 KG
Show	5018040	ISO2-FITTING POM PN16, WATER CONNECTOR, PE/PE	D63-63	PN16	0.715 KG