- For PE pipes according to EN 1555-2 (DIN 8074 / 8075)
- The HAWLE ISO pipe fitting is the easiest way joining polyethylene pipes
- The function of the ISO pipe fitting is clear and simple; the O-ring is made of elastomer and seals well even when the pressure is nil, because it is compressed onto the pipe
- The joint is flexible and the fitting can be turned on the pipe without affecting the grip or seal. Assembly the fitting is quick and simple and can be dismantled if required
- The protective elastomer cap prevents penetration of sand and dirt into the ISO pipe Fitting
- Always use support liner for PE pipes!
- Do not use the fitting again after dismantling!
Hawle quality guarantee
Certificates
Product variants (5)
| Bookmark | BIM data | Item number | Description | Nominal diameter | Outlet 1 | Outlet 2 | Pressure rating | Weight |
|---|---|---|---|---|---|---|---|---|
| 5019719 | ISO2-FITTING POM MOP8, GAS CONNECTOR, PE/PE |
D25-25 | PE25 | PE25 | MOP8=PS | 1 KG | ||
| 5019754 | ISO2-FITTING POM MOP8, GAS CONNECTOR, PE/PE |
D32-32 | PE32 | PE32 | MOP8=PS | 0.14 KG | ||
| 5019874 | ISO2-FITTING POM MOP8, GAS CONNECTOR, PE/PE |
D40-40 | PE40 | PE40 | MOP8=PS | 0.32 KG | ||
| 5019822 | ISO2-FITTING POM MOP8, GAS CONNECTOR, PE/PE |
D50-50 | PE50 | PE50 | MOP8=PS | 0.482 KG | ||
| 5019914 | ISO2-FITTING POM MOP8, GAS CONNECTOR, PE/PE |
D63-63 | PE63 | PE63 | MOP8=PS | 0.73 KG |
Downloads
Find out more about our services.
This product was not found in your country
You can find similar products in the category Fittings