ISO gas reducing elbow, POM 6491

6491

90° connector

Features

For PE pipes according to EN 1555-2 (DIN 8074 / 8075)
The HAWLE ISO pipe fitting is the easiest way joining polyethylene pipes
The function of the ISO pipe fitting is clear and simple; the O-ring is made of elastomer and seals well even when the pressure is nil, because it is compressed onto the pipe
The joint is flexible and the fitting can be turned on the pipe without affecting the grip or seal. Assembly the fitting is quick and simple and can be dismantled if required
The protective elastomer cap prevents penetration of sand and dirt into the ISO pipe Fitting
Always use support liner for PE pipes!
Do not use the fitting again after dismantling!

Item number	Description	Nominal diameter	Pressure rating	Weight
5006011	ISO-FITTING PN4 ELBOW 90°, GASTEC	D 32-25	MOP4=PS	0.14 KG
5019983	ISO2-FITTING POM MOP8, GAS ELBOW 90° RED, PE/PE, IMB	D32-25	MOP8=PS	0.143 KG
5006026	ISO-FITTING PN4 ELBOW 90°, GASTEC	D 40-32	MOP4=PS	0.27 KG
5006027	ISO-FITTING PN4 ELBOW 90°, GAS	40-32	MOP4=PS	0.27 KG
5020001	ISO2-FITTING POM MOP8, GAS ELBOW 90° RED, PE/PE, IMB	D40-32	MOP8=PS	0.28 KG
5020036	ISO2-FITTING POM MOP8, GAS ELBOW 90° RED, PE/PE	D40-32	MOP8=PS	0.27 KG