ISO reducing adapter with internal thread, POM 6230

6230

with internal thread ISO 228

Show

For PE pipes according to EN 12201-2 and DIN 8074, up to PN 16
The HAWLE ISO pipe fitting is the easiest way joining polyethylene pipes
The ISO pipe fitting is suitable for use in drinking water area up to a temperature of 30 °C
The gripping and sealing functions act only the o.d. of the pipe; thereforce only one fitting is required for all pressure ratings up to PN 16
The function of the ISO pipe fitting is clear and simple; the O-ring is made of elastomer and seals well even when the pressure is nil, because it is compressed onto the pipe
As the water pressure and pipe tension increase, the sealing and grip rings are compressed further into the conical chamber, thus increasing the sealing and gripping effect
The joint is flexible and the fitting can be turned on the pipe without affecting the grip or seal. Assembly the fitting is quick and simple and can be dismantled if required.
This design has been well proven for many years in water distribution and is used in pipelines with pressures up to PN 16 (also in vacuum situations, with support liner)
In POM fittings all internal threads are strengthened with a stainless steel ring

Hawle quality guarantee

BIM data	Item number	Description	Nominal diameter	Outlet 1	Outlet 2	Pressure rating	Weight
Show	5019531	ISO2-FITTING POM PN16, WATER ADAPTOR RED, PE/INT. THREAD	D32-1/2"	PE32	IG1/2"	PN16	0.118 KG
Show	5019533	ISO2-FITTING POM PN16, WATER ADAPTOR RED, PE/INT. THREAD	D32-3/4"	PE32	IG3/4"	PN16	0.12 KG
Show	5019545	ISO2-FITTING POM PN16, WATER ADAPTOR RED, PE/INT. THREAD	D40-1"	PE40	IG1"	PN16	0.25 KG
Show	5019548	ISO2-FITTING POM PN16, WATER ADAPTOR RED, PE/INT. THREAD	D40-2"	PE40	IG2"	PN16	0.3 KG
Show	5019555	ISO2-FITTING POM PN16, WATER ADAPTOR RED, PE/INT. THREAD	D50-2"	PE50	IG2"	PN16	0.348 KG