E2 gate valve for gas, flange - PE end

4095E2

SDR 11

Soft wedge gate valves with flange and PE weldings for the connections to the PE pipes to EN 1555-2, DIN 8074
The welded sockets are guaranteed gas-tight and are also guaranteed with 2 seals acting independent of each other plus a Support liner in PE welded sockets. The welding of the valve in the PE pipeline can be implemented by butt fusion welding or an electrofusion welding joint. Following the welding of the valve is not permissible.
One extension spindle for multiple dimensions
Sealing system: the wedge rubber profiles close with minimal friction in the body. There is no abrasion and thus no wear of the sealing body.
The special wedge guide in wear-resistant plastic ensures lowest wear and tear and minimum Operation forces, suitable for frequent actuation at differential pressures of up to 16 bar
Oversized spindle nut with threads, withstands enormous operating torque
100% suitable for underground Installation
Standard model: without handwheel and extension spindle
Temperature range: operation: -10°C to 50°C
Storage: -25°C to 70°C

Hawle quality guarantee

Certificates

Item number	Description	Nominal diameter	Pressure rating	Weight
5002460	E2 VALVE FLANGE/PE TAIL PN10 PE100/SDR11, GAS	DN50/D63	MOP10=PS	11.5 KG
5002466	E2 VALVE FLANGE/PE TAIL PN10 PE100/SDR11, GAS	DN80/D90	MOP10=PS	19.64 KG
5002483	E2 VALVE FLANGE/PE TAIL PN10 PE100/SDR11, GAS	DN150/D180	MOP10=PS	44.9 KG
5002486	E2 VALVE FLANGE/PE TAIL PN10 PE100/SDR11, GAS	DN200/D225	MOP10=PS	77.7 KG