- Soft wedge gate valves with clear cut and free flowing passages in compliance with EN 13774 (EN 1074-1 and 2)
- Readily operated without a bypass or power reinforcement – even at 16 bar differential pressure
- Sealing system: the wedge rubber profiles close with minimal friction in the body. There is no abrasion and thus no wear of the sealing Body
- The special wedge guide in wear-resistant plastic ensures lowest wear and tear and minimum Operation forces, suitable for frequent actuation at differential pressures of up to 16 bar
- Oversized spindle nut with threads, withstands enormous operating torque
- 100% suitable for underground Installation
- Roller bearing as a spindle bearing ensure Minimum operation force (DN 250 - DN 500)
- Standard model: without handwheel and extension spindle
- Model variants: with position indicator No. 4005STE2
- Flanges measured and drilled to EN 1092-2. Standard PN 10. Please indicate PN 16 when ordering.
- Temperature range: operation: -10° C to 50° C
Bearing: -25° C to 70° C
Hawle quality guarantee
Certificates
Product variants (3)
| Bookmark | BIM data | Item number | Description | Nominal diameter | Pressure rating | Weight |
|---|---|---|---|---|---|---|
| 5001842 | E2 VALVE FLANGED ENDS PN16 FOR GAS |
DN80 | MOP16=PS | 20.5 KG | ||
| 5001867 | E2 VALVE FLANGED ENDS PN10 FOR GAS |
DN200 | MOP10=PS | 72 KG | ||
| 5001880 | E2 VALVE FLANGED ENDS PN10 FOR GAS |
DN400 | MOP10=PS | 300 KG |
Downloads
Find out more about our services.
This product was not found in your country
You can find similar products in the category Gate valves