4000ELE3

E3 gate valve for electric actuator PN10 | PN 16

EN 558-1 GR 14, with adapter for actuator
Request product
2D/3D data

Quality, safety, durability: these characteristics are essential for gate valves. We have therefore incorporated our many years of experience into developing our E3 gate valves to give them the finishing "Made for Generations" touch. The result: Hawle E3 gate valves are unrivalled in terms of reliability thanks to their Duplex stainless steel spindle fitted as standard, their permanent ease of operation and their 100% corrosion protection.

Features

Resilient seated gate valve with smooth, straight-through bore

Hawle E3:

  • Double bayonet O-ring carrier is connecting the spindle to the bonnet, allowing a fully encased, uniform epoxy powder coated bonnet for further improved corrosion protection
  • Wedge guide made of wear resistant POM material in load optimized design minimizes attrition and ensures lowest torque actuation
  • Wedge is flexible and fully linked in vulcanized elastomer to the wedge nut. This snug fit dampens vibration during opening and closing of the wedge
  • Wedge nut has a long thread length allowing significantly higher torques than the standard before breaking
  • O-rings, lip-seals mounted in the bonnet are replaceable under operating pressure
  • Extended edge protection to avoid damages during transport, storage and assembly
  • Sliding disks and ball bearing assure low friction performance of the spindle
  • 100% suitable for buried installations
  • Suitable for cleaning with a cleaning pig
  • One extension spindle for several dimensions
  • Suitable for operation by automatic actuators
  • Easy refitting for position indicator and automatic actuators on the standard bonnet (DN 50 to DN 200)
  • To set-up an actuator or a position indicator, remove the centering flange and insert position indicator or actuator with adapter (DN 250 bis DN 400)

Standards

  • Resilient seated gate valve according to EN 1171, EN 1074-1 and EN 1074-2 with smooth, straight-through bore

Flanges sized in accordance with EN 1092-2, drilled according to

  • EN 1092-2 | PN 10 standard (4000E3, 4700E3);
  • EN 1092-2 | PN 25 (4010E3, 4710E3)
  • EN 1092-2 | PN 16 from DN 200 (4000E3, 4700E3)
  • Please specify on order - other standards on request

Face-to-face length acc. EN 558 GR 14

Hawle quality guarantee

Additional information

Declaration of conformity 364 KB

Explainer videos

HAWLE-E3 Gate Valve english
E3-Video

Product variants (12)

Bookmark BIM data Item number Description Nominal diameter Pressure rating Weight
Show 5019701 E3 VALVE FLANGED ENDS PN16
WITH ADAPTOR FOR ACTUATOR		 DN65 PN16 19 KG
Show 5019618 E3 VALVE FLANGED ENDS PN16
WITH ADAPTOR FOR ACTUATOR		 DN80 PN16 19.92 KG
Show 5019307 E3 VALVE FLANGED ENDS PN16
WITH ADAPTOR FOR ACTUATOR		 DN100 PN16 24.4 KG
Show 5019619 E3 VALVE FLANGED ENDS PN16
WITH ADAPTOR FOR ACTUATOR		 DN125 PN16 36.8 KG
Show 5019620 E3 VALVE FLANGED ENDS PN16
WITH ADAPTOR FOR ACTUATOR		 DN150 PN16 40.56 KG
Show 5019621 E3 VALVE FLANGED ENDS PN10
WITH ADAPTOR FOR ACTUATOR		 DN200 PN10 67 KG
Show 5019782 E3 VALVE FLANGED ENDS PN16
WITH ADAPTOR FOR ACTUATOR		 DN200 PN16 65.6 KG
5020266 E3 VALVE FLANGED ENDS PN10
WITH ADAPTOR FOR ACTUATOR		 DN250 PN10 103 KG
5020267 E3 VALVE FLANGED ENDS PN16
WITH ADAPTOR FOR ACTUATOR		 DN250 PN16 103 KG
5020258 E3 VALVE FLANGED ENDS PN10
WITH ADAPTOR FOR ACTUATOR		 DN300 PN10 155 KG
5020260 E3 VALVE FLANGED ENDS PN16
WITH ADAPTOR FOR ACTUATOR		 DN300 PN16 154 KG
5020261 E3 VALVE FLANGED ENDS PN16
WITH ADAPTOR FOR ACTUATOR		 DN300 PN16 0 KG

Spare parts

Find suitable spare parts.
8700E3
E3 gate valve wedge
Back to overview
This product was not found in your country
You can find similar products in the category Gate Valves
Show products