Quality, safety, durability: these characteristics are essential for gate valves. We have therefore incorporated our many years of experience into developing our E3 gate valves to give them the finishing "Made for Generations" touch. The result: Hawle E3 gate valves are unrivalled in terms of reliability thanks to their Duplex stainless steel spindle fitted as standard, their permanent ease of operation and their 100% corrosion protection.
Features
Resilient seated gate valve with smooth, straight-through bore
- Not suitable for drinking water
Hawle E3:
- Double bayonet O-ring carrier is connecting the spindle to the bonnet, allowing a fully encased, uniform epoxy powder coated bonnet for further improved corrosion protection
- Wedge guide made of wear resistant POM material in load optimized design minimizes attrition and ensures lowest torque actuation
- Wedge is flexible and fully linked in vulcanized elastomer to the wedge nut. This snug fit dampens vibration during opening and closing of the wedge
- Wedge nut has a long thread length allowing significantly higher torques than the standard before breaking
- O-rings, lip-seals mounted in the bonnet are replaceable under operating pressure
- Extended edge protection to avoid damages during transport, storage and assembly
- Sliding disks and ball bearing assure low friction performance of the spindle
- 100% suitable for buried installations
- Suitable for cleaning with a cleaning pig
- One extension spindle for several dimensions
- Suitable for operation by automatic actuators
- Easy refitting for position indicator and automatic actuators on the standard bonnet (DN 50 to DN 200)
- To set-up an actuator or a position indicator, remove the centering flange and insert position indicator or actuator with adapter (DN 250 bis DN 400)
Standards
- Resilient seated gate valve according to EN 1171, EN 1074-1 and EN 1074-2 with smooth, straight-through bore
Flanges sized in accordance with EN 1092-2, drilled according to
- EN 1092-2 | PN 10 standard
- EN 1092-2 | PN 16 from DN 200
- Please specify on order - other standards on request
Face-to-face length acc. EN 558 GR 14
Hawle quality guarantee
Product variants (16)
| Bookmark | BIM data | Item number | Description | Nominal diameter | Pressure rating | Weight |
|---|---|---|---|---|---|---|
| 5030715 | E3 VALVE FLANGED ENDS PN16 FOR SEAWATER |
DN50 | PN16 | 9.8 KG | ||
| 5030717 | E3 VALVE FLANGED ENDS PN16 FOR SEAWATER |
DN65 | PN16 | 15.2 KG | ||
| 5030716 | E3 VALVE FLANGED ENDS PN16 FOR SEAWATER |
DN80 | PN16 | 16.2 KG | ||
| 5019663 | E3 VALVE FLANGED ENDS PN16 FOR SEAWATER |
DN100 | PN16 | 20.2 KG | ||
| 5030718 | E3 VALVE FLANGED ENDS PN16 FOR SEAWATER |
DN125 | PN16 | 34 KG | ||
| 5019684 | E3 VALVE FLANGED ENDS PN16 FOR SEAWATER |
DN150 | PN16 | 37 KG | ||
| 5019685 | E3 VALVE FLANGED ENDS PN16 FOR SEAWATER |
DN200 | PN16 | 60.2 KG | ||
| 5019784 | E3 VALVE FLANGED ENDS PN10 FOR SEAWATER |
DN200 | PN10 | 60.5 KG | ||
| 5031530 | E3 VALVE FLANGED ENDS PN10 FOR SEAWATER |
DN250 | PN10 | 102 KG | ||
| 5031550 | E3 VALVE FLANGED ENDS PN16 FOR SEAWATER |
DN250 | PN16 | 102.2 KG | ||
| 5031531 | E3 VALVE FLANGED ENDS PN16 FOR SEAWATER |
DN300 | PN16 | 153.6 KG | ||
| 5032849 | E3 VALVE FLANGED ENDS PN10 FOR SEAWATER |
DN300 | PN10 | 150 KG | ||
| 5031604 | E3 VALVE FLANGED ENDS PN10 FOR SEAWATER |
DN350 | PN10 | 208 KG | ||
| 5031704 | E3 VALVE FLANGED ENDS PN16 FOR SEAWATER |
DN350 | PN16 | 208 KG | ||
| 5031605 | E3 VALVE FLANGED ENDS PN16 FOR SEAWATER |
DN400 | PN16 | 263 KG | ||
| 5031705 | E3 VALVE FLANGED ENDS PN10 FOR SEAWATER |
DN400 | PN10 | 265 KG |
This product was not found in your country
You can find similar products in the category Gate Valves