HAWLE-FIT service valve with sockets 2631

2631

with push-fit sockets for PE pipes

2D/3D data

There can be no compromises when it comes to water supply. That is the principle we follow at Hawle when selecting the materials we use for our service valves. The Hawle POM service valve is additionally fitted with brass, stainless steel and elastomer elements. All components are manufactured from non-corrosive materials, guaranteeing one hundred percent suitability for underground installation as well as maximum functionality and durability. This proven Hawle quality is a promise "Made for Generations".

Hawle FIT pipe connections feature an impressive, unique design. Hawle FIT comes fully assembled, enabling it to be installed quickly, efficiently and without errors. The advanced development of the tried-and-tested ISO fitting is therefore operational from the very first moment. Installation and dismantling are performed easily with no special tools required. The Hawle FIT range is also a sustainable solution as the connection can be reused.

Features

Resilient seated gate valve with smooth, straight-through bore

Sealing system: the contact between wedge and body is friction free. Therefore no scuffing or abrasion of the wedge
All parts made of corrosion free materials
Maximum spindle torque: 80 Nm
Technical details ISO-fitting see page K 3/1
Bonnet with body homogeneously connected through rotational welding
2 O-rings for spindle sealing
Spindle bearing made of brass
Overload protection
Threaded connection for extension spindle
Suitable for all underground installations

Hawle-FIT:

The new generation of fitting pipes Hawle-FIT has been designed to connect PE pipes with an outside diameter of d 25 to 63 and a working pressure of up to 16 bar
Installation and dismantling is simply performed with no special tools required
The service life of the Hawle-FIT is guaranteed by the use of high-quality polymer materials; the clamping nut as functional carrier is very stable through its unique construction
The special clamp toothing (no continuous groove) reduces the impact force on the pipe. This significantly enhances the service life of the pipe
The stainless steel reinforcing ring increases the strength of the fitting with internal thread outlets
Assembly-ready supply: no screwing required before inserting the pipe

Standards

Resilient seated gate valve according to EN 1074-1 and EN 1074-2 with smooth, straight-through bore

Hawle-FIT:

For PE-pipes according to EN 12201 and DIN 8074 | to PN 16; up to 30° C medium temperature, for potable water
PE 80: SDR 7,4 — SDR 17,6
PE 100: SDR 11
PE 100: SDR 17 (support liner No. 6021 is required for meeting the standards)
Restraint acc. ISO 14236