E2 valve for PE fusion, PN 10 (gas) 4055E2

4055E2

SDR 11

Feedback on our products? Let us know what you think!

Soft seated gate valve with PE fusion tails for Connection with PE pipes in compliance with EN 1555-2, DIN 8074
Two factory assembled PE fusion tails with screw connection to the valve body. Two independent seals and an integrated support liner
assure tight connection and no gas leakage. The Hawle E2 valve with PE fusion tails is connected to the pipeline either by means of butt fusion or using electrofusion sockets.
One extension spindle for multiple dimensions
Sealing system: the wedge rubber profiles close with minimal friction in the body. There is no erasure and thus no wear of the sealing Body
The special wedge guide in wear-resistant plastic ensures lowest wear and tear and minimum Operation forces, suitable for frequent actuation at differential pressures of up to 16 bar
Oversized spindle nut with threads, withstands enormous operating torque
100% suitable for underground Installation
Standard model: without handwheel and extension spindle
Temperature range: operation: -10°C to 50°C
Storage: -25°C to 70°C

Hawle quality guarantee

Certificates

Item number	Description	Nominal diameter	Pressure rating	Weight
5002389	E2 VALVE FOR PE FUSION PN10 PE100/SDR11, GAS	DN50/D63	MOP10=PS	11.52 KG
5002393	E2 VALVE FOR PE FUSION PN10 PE100/SDR11, GAS	DN65/D75	MOP10=PS	16.9 KG
5002397	E2 VALVE FOR PE FUSION PN10 PE100/SDR11, GAS	DN80/D90	MOP10=PS	20.05 KG
5002401	E2 VALVE FOR PE FUSION PN10 PE100/SDR11, GAS	DN100/D125	MOP10=PS	32.5 KG
5002405	E2 VALVE FOR PE FUSION PN10 PE100/SDR11, GAS	DN100/D110	MOP10=PS	27 KG
5002411	E2 VALVE FOR PE FUSION PN10 PE100/SDR11, GAS	DN150/D160	MOP10=PS	50.5 KG
5002415	E2 VALVE FOR PE FUSION PN10 PE100/SDR11, GAS	DN150/D180	MOP10=PS	44.6 KG
5002419	E2 VALVE FOR PE FUSION PN10 PE100/SDR11, GAS	DN200/D225	MOP10=PS	88 KG
5002423	E2 VALVE FOR PE FUSION PN10 PE100/SDR11, GAS, GERMAN V.	DN200/D225	MOP10=PS	74.5 KG
5002425	E2 VALVE FOR PE FUSION PN16 PE100/SDR11, GAS, GERMAN V.	DN200/D200	MOP10=PS	88 KG