E2 valve for PE fusion, PN 6 - for gas 4056E2

4056E2

SDR 17.6

Feedback on our products? Let us know what you think!

Soft seated gate valve with PE fusion tails for Connection with PE pipes in compliance with EN 1555-2, DIN 8074
Two factory assembled PE fusion tails with screw connection to the valve body. Two independent seals and an integrated support liner
assure tight connection and no gas leakage. The Hawle E2 valve with PE fusion tails is connected to the pipeline either by means of butt fusion or using electrofusion sockets.
One extension spindle for multiple dimensions
Sealing system: the wedge rubber profiles close with minimal friction in the body. There is no erasure and thus no wear of the sealing Body
The special wedge guide in wear-resistant plastic ensures lowest wear and tear and minimum Operation forces, suitable for frequent actuation at differential pressures of up to 16 bar
Oversized spindle nut with threads, withstands enormous operating torque
100% suitable for underground Installation
Standard model: without handwheel and extension spindle
Temperature range: operation: -10°C to 50°C
Storage: -25°C to 70°C

Hawle quality guarantee

Certificates

Item number	Description	Nominal diameter	Pressure rating	Weight
5002427	E2 VALVE FOR PE FUSION PN6 PE100/SDR17,6, GAS	DN50/D63	MOP6=PS	11.57 KG
5002430	E2 VALVE FOR PE FUSION PN6 PE100/SDR17,6, GAS	DN80/D90	MOP6=PS	19.9 KG
5002432	E2 VALVE FOR PE FUSION PN6 PE100/SDR17,6, GAS	DN100/D125	MOP6=PS	32.49 KG
5002434	E2 VALVE FOR PE FUSION PN6 PE100/SDR17,6, GAS	DN100/D110	MOP6=PS	27.88 KG
5002437	E2 VALVE FOR PE FUSION PN6 PE100/SDR17,6, GAS	DN150/D160	MOP6=PS	51.6 KG
5002438	E2 VALVE FOR PE FUSION PN6 PE100/SDR17,6, GAS	DN150/D180	MOP6=PS	44.5 KG
5002449	E2 VALVE FOR PE FUSION PN6 PE100/SDR17, GAS, GERMAN V.	DN150/D180	MOP6=PS	44.5 KG
5002440	E2 VALVE FOR PE FUSION PN6 PE100/SDR17,6, GAS	DN200/D225	MOP6=PS	80.6 KG
5002453	E2 VALVE FOR PE FUSION PN6 PE100/SDR17, GAS, GERMAN V.	DN200/D225	MOP6=PS	74.5 KG