ISO gas end stop, POM 6226

6226

made of POM

Features

For PE pipes according to EN 1555-2 (DIN 8074 / 8075)
The HAWLE ISO pipe fitting is the easiest way joining polyethylene pipes
The function of the ISO pipe fitting is clear and simple; the O-ring is made of elastomer and seals well even when the pressure is nil, because it is compressed onto the pipe
The joint is flexible and the fitting can be turned on the pipe without affecting the grip or seal. Assembly the fitting is quick and simple and can be dismantled if required
The protective elastomer cap prevents penetration of sand and dirt into the ISO pipe Fitting
Always use support liner for PE pipes!
Do not use the fitting again after dismantling!

Hawle house connections | EN

Item number	Description	Nominal diameter	Pressure rating	Weight
5005823	END STOP PN4 GASTEC	D 20	MOP8=PS	0.04 KG
5018009	ISO2-FITTING POM MOP8, GAS END STOP, PE, IMB	D20	MOP8=PS	0.43 KG
5005827	END STOP PN4 GASTEC	D 25	MOP8=PS	0.06 KG
5019967	ISO2-FITTING POM MOP8, GAS END STOP, PE, IMB	D25	MOP8=PS	0.06 KG
5005831	END STOP PN4 GASTEC	D 32	MOP8=PS	0.09 KG
5005832	END STOP PN4 GAS	D 32	MOP4=PS	0.09 KG
5019968	ISO2-FITTING POM MOP8, GAS END STOP, PE, IMB	D32	MOP8=PS	0.087 KG
5019969	ISO2-FITTING POM MOP8, GAS END STOP, PE	D32	MOP8=PS	0.09 KG
5005838	END STOP PN4 GASTEC	D 40	MOP8=PS	0.2 KG
5019970	ISO2-FITTING POM MOP8, GAS END STOP, PE, IMB	D40	MOP8=PS	0.2 KG
5005844	END STOP PN4 GASTEC	D 50	MOP8=PS	0.27 KG
5005845	END STOP PN4 GAS	D 50	MOP4=PS	0.27 KG
5019971	ISO2-FITTING POM MOP8, GAS END STOP, PE, IMB	D50	MOP8=PS	0.27 KG
5019972	ISO2-FITTING POM MOP8, GAS END STOP, PE	D50	MOP8=PS	0.274 KG
5005851	END STOP PN4 GASTEC	D 63	MOP8=PS	0.39 KG
5005852	END STOP PN4 GAS	D 63	MOP4=PS	0.39 KG
5019974	ISO2-FITTING POM MOP8, GAS END STOP, PE, IMB	D63	MOP8=PS	0.42 KG
5019975	ISO2-FITTING POM MOP8, GAS END STOP, PE	D63	MOP8=PS	0.39 KG